Walk-ins Mon–Sat 9am–6pm at London Bridge and Beckenham 020 7394 2520  |  info@creativeit.tv

Sony VAIO PCV W Series Component-Level Repair

Many repairers swap a whole board when one chip or capacitor has failed. We repair Sony VAIO PCV W Series boards at component level using microsoldering and rework equipment.

Signs your Sony VAIO PCV W Series needs this repair

  • Dead laptop after a power cut or surge
  • Won't charge with a working charger
  • Short circuits after liquid damage
  • Blank or scrambled picture on an undamaged screen
  • Ports that have stopped working
  • Boards other shops said were beyond repair

How we fix your Sony VAIO PCV W Series

Using schematics, a microscope and test equipment, we trace the fault to the failed part, whether that's a MOSFET, capacitor, fuse, power controller or connector.

We replace it with a matching part, test the board under load and check everything works before you collect your Sony VAIO PCV W Series.

How long it takes

How long a component repair takes depends on the parts needed. We confirm the timescale with your quote before starting.

Good to know: If your laptop died after a spill, don't keep trying to switch it on. Power running through a wet board causes more damage.

About this model

An all-in-one desktop PC with a fold-up keyboard and widescreen display, sold from 2002 to about 2004 as a combined home computer and music player. More about the Sony VAIO PCV W Series

Common questions

Why not just replace the motherboard?

Replacement boards for many models are expensive or no longer made. Component repair keeps your original board working at a lower cost.

Can every board be repaired?

Most boards can be repaired. If yours is too badly damaged, we'll tell you and quote for a replacement board instead.

We use your details only to reply to this booking. See our privacy notice.