Walk-ins Mon–Sat 9am–6pm at London Bridge and Beckenham 020 7394 2520  |  info@creativeit.tv

Sony VAIO VGN NR Series Component-Level Repair

Many repairers swap a whole board when one chip or capacitor has failed. We repair Sony VAIO VGN NR Series boards at component level using microsoldering and rework equipment.

Signs your Sony VAIO VGN NR Series needs this repair

  • Dead laptop after a power cut or surge
  • Won't charge with a working charger
  • Short circuits after liquid damage
  • Blank or scrambled picture on an undamaged screen
  • Ports that have stopped working
  • Boards other shops said were beyond repair

How we fix your Sony VAIO VGN NR Series

Using schematics, a microscope and test equipment, we trace the fault to the failed part, whether that's a MOSFET, capacitor, fuse, power controller or connector.

We replace it with a matching part, test the board under load and check everything works before you collect your Sony VAIO VGN NR Series.

How long it takes

How long a component repair takes depends on the parts needed. We confirm the timescale with your quote before starting.

Good to know: If your laptop died after a spill, don't keep trying to switch it on. Power running through a wet board causes more damage.

About this laptop

The budget 15.4-inch VAIO of 2007 and 2008 with a textured casing and integrated graphics, placed beneath the FZ and replaced by the NS. More about the Sony VAIO VGN NR Series

Common questions

Why not just replace the motherboard?

Replacement boards for many models are expensive or no longer made. Component repair keeps your original board working at a lower cost.

Can every board be repaired?

Most boards can be repaired. If yours is too badly damaged, we'll tell you and quote for a replacement board instead.

We use your details only to reply to this booking. See our privacy notice.