Walk-ins Mon–Sat 9am–6pm at London Bridge and Beckenham 020 7394 2520  |  info@creativeit.tv

IBM ThinkPad Edge E50 Component-Level Repair

Component-level repair means fixing the single part that failed on your IBM ThinkPad Edge E50's circuit board, instead of replacing the whole board. It usually costs less and keeps your original hardware.

Signs your IBM ThinkPad Edge E50 needs this repair

  • Dead laptop after a power cut or surge
  • Won't charge with a working charger
  • Short circuits after liquid damage
  • Blank or scrambled picture on an undamaged screen
  • Ports that have stopped working
  • Boards other shops said were beyond repair

How we fix your IBM ThinkPad Edge E50

Using schematics, a microscope and test equipment, we trace the fault to the failed part, whether that's a MOSFET, capacitor, fuse, power controller or connector.

We replace it with a matching part, test the board under load and check everything works before you collect your IBM ThinkPad Edge E50.

How long it takes

How long a component repair takes depends on the parts needed. We confirm the timescale with your quote before starting.

Good to know: If your laptop died after a spill, don't keep trying to switch it on. Power running through a wet board causes more damage.

About this laptop

One of the E-number models in Lenovo's 2010 ThinkPad Edge series, the entry-level ThinkPad family sold alongside the Edge 14 and Edge 15. More about the IBM ThinkPad Edge E50

Common questions

Why not just replace the motherboard?

Replacement boards for many models are expensive or no longer made. Component repair keeps your original board working at a lower cost.

Can every board be repaired?

Most boards can be repaired. If yours is too badly damaged, we'll tell you and quote for a replacement board instead.

We use your details only to reply to this booking. See our privacy notice.