Walk-ins Mon–Sat 9am–6pm at London Bridge and Beckenham 020 7394 2520  |  info@creativeit.tv

Acer TravelMate 5200 Component Level Repair

Many repairers swap a whole board when one chip or capacitor has failed. We repair Acer TravelMate 5200 boards at component level using microsoldering and rework equipment.

Signs your Acer TravelMate 5200 needs this repair

  • Dead laptop after a power cut or surge
  • Charging circuit faults
  • Short circuits after liquid damage
  • Graphics or display circuit faults
  • Ports that have stopped working
  • Boards other shops said were beyond repair

How we fix it

Using schematics, a microscope and test equipment, we trace the fault to the failed part, whether that's a MOSFET, capacitor, fuse, power controller or connector.

We replace it with a matching part, test the board under load and check everything works before you collect your Acer TravelMate 5200.

How long it takes

Component repairs depend on parts. We confirm the timescale with your quote before starting.

Good to know: If your laptop died after a spill, don't keep trying to switch it on. Power running through a wet board causes more damage.

Questions

Why not just replace the motherboard?

Replacement boards for many models are expensive or no longer made. Component repair keeps your original board working at a lower cost.

Can every board be repaired?

Most can. If a board is too badly damaged, we'll tell you and quote for a replacement instead.

We use your details only to reply to this booking. See our privacy notice.